■ BS-R INSTALLATION PROCEDURES | Installation 1. Pre-insert the V-ring into the conveyor shaft in the correct direction. 2. Securely install the BS Cam Clutch onto the shaft. Apply the pressure only on the end face of the inner race when inserting the BS Cam Clutch onto the shaft. Do not hit the inner race directly with a hammer or apply pressure on the outer race. (Refer to page 13 for Installation and Usage) 3. Apply the sealant supplied, to the end face of the inner race and packing, and fix the BS Cam Clutch unit to the conveyor shaft with the end plate. At the same time, use the seal washer on each bolt to prevent oil leakage. 4. After cleaning the inside of the oil reservoir, apply the sealant on the mating face of the oil reservoir. Place the oil level gauge vertically (red line is bottom, and blue is top), for models from BS65R to BS200R; install the oil reservoir to the end face of the outer race with the bolts, while for models BS220R and above, install the oil reservoir to the seal supporter using the bolts. Carefully prevent dust from penetrating the Cam Clutch or oil reservoir. 5. Press the pre-inserted V-ring entirely so that the face of the dust cover contacts closely. 6. In case the ambient temperature rises 40°C and above, it is recommended to set shield or roof and avoid direct sunlight in order to extend the life span of Cam Clutch. |
On the other hand denoune with righteou indignat and dislike menar so beguiled demoralized echarms of pleasure of the moment so blinded by desire that systems.
E-mail: ellen@chinasuma.com
Mobile: 0086-18068536660
Tel: 0086-519-85858018
Fax: 0086-519 85858018
WhatsApp: +86-18068536660
Add: Liudao Industrial Park, YaoguanTown, Wujin District , Changzhou City , Jiangsu Province, China , 213102