0
| Freewheel Size | Maximum torque MM | Nominal torque MN | Maximum speed | Load rating of bearing support | Bore d | B | D | K | Weight | |||||||||||
| dynamic C | static C0 | |||||||||||||||||||
| Series ZZ … P | Series ZZ … PP | lb-ft | Nm | lb-ft | Nm | rpm | lbf | N | lbf | N | inch | mm | inch | mm | inch | mm | inch | mm | lbs | kg |
| ZZ 6201 P | 13.8 | 18.6 | 6.9 | 9.3 | 000 | 371 | 100 | 629 | 800 | 0.472 | 12* | 0.394 | 10 | 1.260 | 32 | 1.535 | 39 | 0.09 | 0.04 | |
| ZZ 6202 P | ZZ 6202 PP | 25.2 | 34.0 | 12.6 | 17.0 | 400 | 665 | 400 | 764 | 400 | 0.591 | 15* | 0.433 | 11 | 1.378 | 35 | 1.654 | 42 | 0.13 | 0.06 |
| ZZ 6203 P | ZZ 6203 PP | 44.0 | 60.0 | 22.0 | 30.0 | 350 | 780 | 900 | 854 | 800 | 0.669 | 17* | 0.472 | 12 | 1.575 | 40 | 2.008 | 51 | 0.15 | 0.07 |
| ZZ 6204 P | ZZ 6204 PP | 74.0 | 100.0 | 37.0 | 50.0 | 000 | 115 | 400 | 012 | 500 | 0.787 | 20* | 0.551 | 14 | 1.850 | 47 | 2.283 | 58 | 0.24 | 0.11 |
| ZZ 6205 P | ZZ 6205 PP | 126.0 | 170.0 | 63.0 | 85.0 | 200 | 405 | 700 | 236 | 500 | 0.984 | 25* | 0.591 | 15 | 2.047 | 52 | 2.480 | 63 | 0.30 | 0.14 |
| ZZ 6206 P | ZZ 6206 PP | 204.4 | 276.0 | 102.2 | 138.0 | 200 | 630 | 700 | 461 | 500 | 1.181 | 30* | 0.630 | 16 | 2.441 | 62 | 2.874 | 73 | 0.46 | 0.21 |
| ZZ 6207 P | ZZ 6207 PP | 259.2 | 350.0 | 129.6 | 175.0 | 600 | 835 | 600 | 641 | 300 | 1.378 | 35* | 0.669 | 17 | 2.835 | 72 | 3.346 | 85 | 0.66 | 0.30 |
| ZZ 40 P | ZZ 40 PP | 481.4 | 650.0 | 240.7 | 325.0 | 000 | 485 | 500 | 765 | 300 | 1.575 | 40 | 0.866 | 22 | 3.150 | 80 | 3.710 | 94 | 1.10 | 0.50 |
See page 9 for determination of selection torque.
Keyway according to DIN 6885, page 1 • Tolerance of keyway width JS10.
* Keyway according to DIN 6885, page 3 • Tolerance of keyway width JS10.
Mounting Series ZZ … PP: In order to transmit the torques specified in the table, the outer ring must be installed in a housing with an external diameter K. The housing should be made of steel or grey cast iron in minimum quality GG-20. When using other housing materials or smaller external diameters, we urge you to contact the factory regarding the transmissible torque. | The tolerance of the housing bore "D" must be ISO N6 and the tolerance of the shaft must be ISO k6. The permissible operating temperature of the freewheel is + 40°F to +140°F. Please contact the factory if the temperature is different than the given values. | Lubrication The freewheels are supplied grease-filled. |
On the other hand denoune with righteou indignat and dislike menar so beguiled demoralized echarms of pleasure of the moment so blinded by desire that systems.
E-mail: ellen@chinasuma.com
Mobile: 0086-18068536660
Tel: 0086-519-85858018
Fax: 0086-519 85858018
WhatsApp: +86-18068536660
Add: Liudao Industrial Park, YaoguanTown, Wujin District , Changzhou City , Jiangsu Province, China , 213102
