Introduction
1. Type NF is a roller type freewheel non-bearing supported from Suma industrial bearing company. Bearings are required to support axialand radial loads. Lubrication and sealing must also be provided by the installation.
2.Standard lubrication is oil. Nominal outside diameter is a standard ball bearing dimension. A typical arrangement is to install this type alongside a bearing with the same housing tolerances,
3.The inner race is keyed to the shaft. The outer race has a positive n6 tolerance to give a press fit in a H7 housing. Additional side notches provide for positive torque transmission.
4.If the housing tolerance is to K6, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly.
Technical Parameter
Type | Size | Overrunning speeds | Weight | ||||||||||
NF | dH7 (mm) | TKN‑1 (Nm ) | Nimax2) (min-1) | Namax3) (min-1) | Dn6 (mm) | D5 (mm) | D6 (mm) | L (mm) | t (mm) | bH11 (mm) | r (mm) | (kg) | |
8 | 20 | 5000 | 6000 | 37 | 30 | 20 | 20 | 3 | 6 | 1.0 | 0.1 | ||
12 | 20 | 5000 | 6000 | 37 | 30 | 20 | 20 | 3 | 6 | 1.0 | 0.1 | ||
15 | 78 | 4500 | 5400 | 47 | 37 | 26 | 30 | 3.5 | 7 | 1.5 | 0.3 | ||
20 | 188 | 3000 | 3600 | 62 | 52 | 37 | 36 | 3.5 | 8 | 2.0 | 0.6 | ||
25 | 250 | 2200 | 2600 | 80 | 68 | 49 | 40 | 4 | 9 | 2.5 | 1.1 | ||
30 | 500 | 1800 | 2100 | 90 | 75 | 52.5 | 48 | 5 | 12 | 2.5 | 1.6 | ||
35 | 663 | 1600 | 1950 | 100 | 80 | 58 | 53 | 6 | 13 | 2.5 | 2.3 | ||
40 | 100 | 1250 | 1700 | 110 | 90 | 62 | 63 | 7 | 15 | 3.0 | 3.1 | ||
45 | 100 | 1100 | 1500 | 120 | 95 | 69 | 63 | 7 | 16 | 3.0 | 3.7 | ||
50 | 2375 | 850 | 1300 | 130 | 110 | 82 | 80 | 8.5 | 17 | 3.5 | 5.4 | ||
55 | 2500 | 800 | 1200 | 140 | 115 | 83 | 80 | 9 | 18 | 3.5 | 6.1 | ||
60 | 4250 | 700 | 1100 | 150 | 125 | 93.5 | 95 | 9 | 18 | 3.5 | 8.5 | ||
70 | 5875 | 620 | 900 | 170 | 140 | 106 | 110 | 9 | 20 | 3.5 | 13.0 | ||
80 | 10000 | 550 | 800 | 190 | 160 | 122 | 125 | 9 | 20 | 4.0 | 18.0 | ||
90 | 17250 | 480 | 700 | 215 | 180 | 133 | 140 | 11.5 | 24 | 4.0 | 25.3 | ||
100 | 19625 | 400 | 600 | 260 | 210 | 157 | 150 | 14.5 | 28 | 4.0 | 42.1 | ||
130 | 34750 | 300 | 480 | 300 | 240 | 188 | 180 | 17 | 32 | 5.0 | 65.0 | ||
150 | 44375 | 250 | 400 | 320 | 260 | 205 | 180 | 17 | 32 | 5.0 | 95.0 |
NOTES
1) T max = 2 × T KN
» Refer to Selection page 10 to 13
2) Inner race overruns
3) Outer race overruns
Keyway to DIN 6885.1
Mounting Example
Product display
On the other hand denoune with righteou indignat and dislike menar so beguiled demoralized echarms of pleasure of the moment so blinded by desire that systems.
E-mail: ellen@chinasuma.com
Mobile: 0086-18068536660
Tel: 0086-519-85858018
Fax: 0086-519 85858018
WhatsApp: +86-18068536660
Add: Liudao Industrial Park, YaoguanTown, Wujin District , Changzhou City , Jiangsu Province, China , 213102