DC races are offered for use with the DC freewheel cages shown on the previous pages. The cage and race assembly, makes a non-bearing supported freewheel.
Bearing support for axial and radial loads must beprovided, along with lubrication and sealing. The spragspace tolerance must not be exceeded when all bearing clearances and mounting tolerances are considered,(» see table page 43).
Taper between races should be below 0,007 mm for 25 mm width. Outer races type A and B should be pressed into housings that will not deform after assembly. Please contact our technical department if you need to transmit maximum freewheel torque capacity with A and G type.Key stresses may have to be checked.
Size | Number of holes ×ø | Corresponding DC Type | |||||||||||||||
dH7 | LG | LH | LJ | Dj6 | T | Di+0.008 -0.005 | L | SAn6 | b1P10 | t | SBs6 | SCg6 | DL±0.1 | Da±0.013 | |||
[mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | ||||||
DC 230A | 16 | 72 | 6 | 3.5 | 54.752 | DC 3809A | |||||||||||
DC 230B | 16 | 72 | 54.752 | ||||||||||||||
DC 230C | 16 | 95 | 78 | 8×7 | 54.752 | ||||||||||||
DC 230 G-10 | 10 | 16 | 38.092 | ||||||||||||||
DC 230 G-15 | 15 | 16 | 38.092 | ||||||||||||||
DC 230 G-20 | 20 | 16 | 38.092 | ||||||||||||||
DC 230 H-1 | 10 | 33 | 35 | 17 | 38.092 | ||||||||||||
DC 230 H-15 | 15 | 33 | 35 | 17 | 38.092 | ||||||||||||
DC 230 H-20 | 20 | 33 | 35 | 17 | 38.092 | ||||||||||||
DC 230 J-10 | 10 | 50 | 35 | 17 | 38.092 | ||||||||||||
DC 230 J-15 | 15 | 50 | 35 | 17 | 38.092 | ||||||||||||
DC 230 J-20 | 20 | 50 | 35 | 17 | 38.092 | ||||||||||||
DC 167A | 16 | 90 | 10 | 5 | 71.425 | DC 5476A DC 5476A (4c) | |||||||||||
DC 167B | 16 | 90 | 71.425 | ||||||||||||||
DC 167C | 16 | 110 | 95 | 8×9 | 71.425 | ||||||||||||
DC 167G-25 | 25 | 16 | 54.765 | ||||||||||||||
DC 167G-30 | 30 | 16 | 54.765 | ||||||||||||||
DC 167G-35 | 35 | 16 | 54.765 | ||||||||||||||
DC 167H-25 | 25 | 35 | 50 | 19 | 54.765 | ||||||||||||
DC 167H-30 | 30 | 35 | 50 | 19 | 54.765 | ||||||||||||
DC 167H-35 | 35 | 35 | 50 | 19 | 54.765 | ||||||||||||
DC 167J-25 | 25 | 54 | 50 | 19 | 54.765 | ||||||||||||
DC 167J-30 | 30 | 54 | 50 | 19 | 54.765 | ||||||||||||
DC 167J-35 | 35 | 54 | 50 | 19 | 54.765 | ||||||||||||
DC 168A | 21 | 110 | 14 | 5.5 | 88.877 | DC 7221 (5c)‘ DC 7221B DC 7221B (5c) | |||||||||||
DC 168B | 21 | 110 | 88.877 | ||||||||||||||
DC 168C | 21 | 140 | 120 | 8 × 11 | 88.877 | ||||||||||||
DC 168G-40 | 40 | 21 | 72.217 | ||||||||||||||
DC 168G-45 | 45 | 21 | 72.217 | ||||||||||||||
DC 168G-50 | 50 | 21 | 72.217 | ||||||||||||||
DC 168H-40 | 40 | 42 | 65 | 21 | 72.217 | ||||||||||||
DC 168H-45 | 45 | 42 | 65 | 21 | 72.217 | ||||||||||||
DC 168H-50 | 50 | 42 | 65 | 21 | 72.217 | ||||||||||||
DC 168J-40 | 40 | 63 | 65 | 21 | 72.217 | ||||||||||||
DC 168J-45 | 45 | 63 | 65 | 21 | 72.217 | ||||||||||||
DC 168J-50 | 50 | 63 | 65 | 21 | 72.217 | ||||||||||||
DC 235A | 16 | 150 | 20 | 7.5 | 119.891 | DC 10323A (5c) | |||||||||||
DC 235B | 16 | 150 | 119.891 | ||||||||||||||
DC 235C | 16 | 190 | 170 | 8 × 11 | 119.891 | ||||||||||||
DC 235G-55 | 55 | 16 | 103.231 | ||||||||||||||
DC 235G-60 | 60 | 16 | 103.231 | ||||||||||||||
DC 235G-75 | 75 | 16 | 103.231 | ||||||||||||||
DC 235H-55 | 55 | 43 | 100 | 27 | 103.231 | ||||||||||||
DC 235H-60 | 60 | 43 | 100 | 27 | 103.231 | ||||||||||||
DC 235H-75 | 75 | 43 | 100 | 27 | 103.231 | ||||||||||||
DC 235J-55 | 55 | 70 | 100 | 27 | 103.231 | ||||||||||||
DC 235J-60 | 60 | 70 | 100 | 27 | 103.231 |
On the other hand denoune with righteou indignat and dislike menar so beguiled demoralized echarms of pleasure of the moment so blinded by desire that systems.
E-mail: ellen@chinasuma.com
Mobile: 0086-18068536660
Tel: 0086-519-85858018
Fax: 0086-519 85858018
WhatsApp: +86-18068536660
Add: Liudao Industrial Park, YaoguanTown, Wujin District , Changzhou City , Jiangsu Province, China , 213102